↵ select ↓ ↑ navigate esc close

ULA’s Vulcan set to return to flight with first Amazon Leo payload

NASASpaceFlight.com ·

United Launch Alliance’s current flagship launch vehicle, Vulcan, is scheduled to return to flight after being grounded since February due to recurring nozzle issues with the GEM-63XL solid rocket boosters. The first nozzle issue occurred in October 2024 during the rocket’s second flight, before a similar issue occurred on the USSF-87 mission in February of this year.

A Vulcan VC6L, the most powerful configuration of the Vulcan rocket with six solid rocket boosters, an extended payload fairing, and a low-Earth orbit-optimized Centaur V upper stage, is scheduled to fly the Amazon Leo LV-01 mission. Launch is set for Friday, Nov. 13, at 12:54 PM EST (17:54 UTC) from Space Launch Complex 41 (SLC-41) at the Cape Canaveral Space Force Station in Florida. The launch window lasts half an hour and closes at 1:24 PM EST (18:24 UTC). Launch weather is currently 90% favorable.

The LV-01 vehicle assembled in VIF-A prior to rollout. (Credit: ULA)

The 65-m-tall rocket, capable of carrying up to 27,200 kg to low-Earth orbit (LEO), will generate 17.2 mN of thrust with six GEM-63XLs and two Blue Origin BE-4 engines, using liquid oxygen and methane as propellants. The rocket will take a northeast trajectory carrying 40 Amazon Leo satellites. This will be the most satellites carried on any Amazon Leo mission to date and will be the first of up to 38 Vulcan launches booked by Amazon with ULA for its broadband constellation, a competitor to Starlink.

See Also

Mission LV-01 will deploy its satellites to a 450 km circular parking orbit inclined 51.9 degrees to the equator, and will use 21 separate deployment events. The first deployment will occur at about T+01:17 hours after liftoff, and the overall payload deployment sequence will last about 25 minutes and 40 seconds. The Centaur V will coast for another 219 seconds before turning to execute its deorbit burn, which occurs nearly two hours after liftoff.

Once the LV-01 satellites are deployed, the Amazon Leo constellation will have 432 satellites in orbit. As of early November, 368 satellites are in their operational orbit, with six satellites having reentered Earth’s atmosphere to date. Amazon Leo needs 578 satellites deployed to a circular orbit at an altitude of 630 km to start initial regional service, and the first-generation network is scheduled to use up to 3,236 satellites.

Amazon obtained an extension from the Federal Communications Commission (FCC) on June 5 of this year for a waiver of the requirement to fly half of its satellites by July 30, 2026. This will allow the company to complete its constellation by July 30, 2029. If the constellation is not complete by then, the FCC could limit Amazon to using the satellites that had already launched.

Infographic showing the Vulcan flight profile for LV-01. (Credit: ULA)

The Amazon Leo service has already signed up leading customers such as Delta Air Lines, JetBlue Airways Corporation, Crane Worldwide Logistics, Hunt Energy, and others, and will also offer its broadband product to individual users.

Amazon Leo also has flights booked on other launch vehicles such as New Glenn and the Ariane 64, but the company’s Vulcan launches are critical for building out the constellation at scale in a timely manner. The LV-01 flight will be closely watched, and any issues during the launch, such as another nozzle liberation, will likely delay future flights of the rocket.

The GEM-63XL, a stretched version of the GEM-63 that has successfully been used on ULA’s Delta IV Medium and Atlas V rockets, has had a decidedly mixed flight record. The Vulcan can use zero, two, four, or six solid rocket boosters, and the boosters worked well on the first Vulcan flight.

The nozzle anomaly on Vulcan’s second flight. (Credit: Sawyer Rosenstein for NSF)

However, the second flight, using the same VC2S two-booster configuration with a standard payload fairing as in the first flight, saw a nozzle “liberation” event 37 seconds after liftoff on one of the boosters. The rocket was able to compensate for the resulting asymmetry and loss of thrust, successfully reaching orbit with an inert demonstration payload and experiments.

Northrop Grumman (NGC), the GEM-63XL contractor, investigated the issue and successfully tested a modified GEM-63XL at its facility in Promontory, Utah, in February 2025. Then ULA CEO Tory Bruno stated that the failure originated in insulators bonded to the inside of the shell that later became the nozzle.

Vulcan returned to flight in August 2025 with the USSF-106 mission, and that flight, using the VC4S four-booster configuration, was fully successful with no “observations” on the GEM-63XLs. This seemed to confirm that the nozzle burn-through and liberation issue had been solved.

Leo Vulcan 1 (LV-01) payload on the move.

LV-01 is the first of 38 Leo missions on @ulalaunch’s heavy-lift Vulcan rocket, and last week, teams successfully transported the 40-satellite payload—encapsulated inside a 70-foot-tall fairing—to the new Amazon Vertical Integration… pic.twitter.com/5zXbiAmkdO

— Amazon Leo (@AmazonLeo) October 26, 2026

However, the USSF-87 flight, using another VC4S, on Feb. 12 of this year did not go entirely as planned. The launch was ultimately successful, but an “observation” of one of the GEM-63XL nozzles occurred 69 seconds after liftoff. The rocket experienced a similar asymmetry and loss of thrust from the booster, but it successfully compensated for the issue.

Vulcan was effectively grounded while the issue was investigated, with the U.S. Space Force suspending launches on the rocket. NGC, ULA, and the Space Force got to work investigating the issue, and NGC successfully test-fired a GEM-63XL with an enhanced nozzle on April 15 at Promontory as part of the company’s efforts to return the booster to flight.

The investigation identified three credible causes of the nozzle liberation issue experienced on USSF-87, and NGC applied fixes to mitigate each. The changes to the booster included design and manufacturing fixes, and these will be tested on LV-01. NGC and ULA will gather data during this flight to help improve the nozzle.

The Vulcan core stage for LV-01 being rolled out of VIF-A for its wet dress rehearsal. (Credit: ULA)

LV-01 is the first Vulcan mission to be processed at the new Amazon Vertical Integration Facility (VIF-A), built to process Amazon Leo missions. Previous Vulcan flights were processed in the Vertical Integration Facility – Government (VIF-G), which will be used to integrate national security and Amazon Leo missions, allowing two rockets to be prepared simultaneously.

The core stage for LV-01, known as V-012, was rolled out to SLC-41 this summer from VIF-A for a wet dress rehearsal before being rolled back for flight preparations. Technicians stacked the six GEM-63XLs and payload on the vehicle, which were rolled out to the pad on Nov. 12 on the new Amazon Vulcan Launch Platform, like VIF-A, dedicated for Amazon Leo flights. The launch readiness review on Nov. 11 cleared LV-01 for launch.

If the LV-01 flight goes well, ULA is prepared to ramp up its Vulcan flight cadence, with the LV-02 mission for Amazon Leo already being processed in VIF-G. The Space Force and NASA are monitoring the flight, as national security payloads and the Boeing Starliner crewed spacecraft are planned to launch on Vulcan in the future.

(Lead image: The encapsulated LV-01 payload before integration in the VIF-A building. Credit: ULA)

The post ULA’s Vulcan set to return to flight with first Amazon Leo payload appeared first on NASASpaceFlight.com.