
At 5:16:07 AM EST (10:16 UTC) on Nov. 18, and at a distance of 26 billion km from Earth, humanity’s furthest probe, Voyager 1, reached its most notable milestone yet. Nearly 50 years after its launch in September 1977, Voyager 1 reached a distance of one light-day from Earth, the distance light can travel in 24 hours. However, the concept of sending a probe on a “Grand Tour” of the outer planets and eventually into interstellar space dates back to the 1960s. After a storied career exploring space, Voyager 1 deserves a look back at how it got to where it is today, and where it is going.
NASA’s Voyager program
The Voyager probes were conceived in the late 1960s and early 1970s as part of the larger Planetary Grand Tour program. This program would see probes fly past the outer planets of Jupiter, Saturn, Uranus, Neptune, Pluto (considered a planet until 2006), and Saturn’s moon, Titan. The probes would be able to fly past all the target planets via gravitational assists due to a planetary alignment that occurs only once every 175 years.
The scientist who discovered this alignment, Gary Flandro, discovered the possibility in 1964. His calculations showed that the best option for the mission would be to launch spacecraft in 1977. The program would formally be endorsed by NASA’s Jet Propulsion Laboratory in 1966.
The program would consist of four probes: two would fly past Jupiter, Saturn, and Pluto, and the other two would fly past Jupiter, Uranus, and Neptune. However, due to budget constraints from the upcoming Space Shuttle program, the Grand Tour program was shelved in December 1971.
In 1972, the program would be scaled down to visit only four planets, with two probes built using hardware from the Mariner probes. Initially named Mariner-Jupiter-Saturn, the program was renamed Voyager in March 1977.
The two probes would follow trajectories established during the earlier Grand Tour program. One trajectory would focus on Jupiter, Saturn, and Titan (JST), while another would serve as a flexible option that still targets Jupiter and Saturn, and would be named (JSX). JSX would act as a backup if JST failed, but if JST succeeded, JSX would continue with the grand tour.
See Also
Voyager 1 would receive the JST designation, while its sibling spacecraft, Voyager 2, would receive the JSX designation. Launched in September and August 1977, respectively, the primary mission objective was to compare the characteristics of Jupiter and Saturn. Following the primary mission, the probes would either follow the JST or JSX trajectory while still using the scientific instruments they had used at Jupiter and Saturn.
Voyager spacecraft design
Voyager 1 and 2 are identical probes, each with a mass of 815 kg at launch, of which approximately 93 kg was hydrazine propellant. The two probes are powered by a radioisotope thermoelectric generator (RTG), which uses the decay heat of Plutonium-238 to generate electricity, producing 470 watts (W) of power at launch. Voyager’s communication system consists of a single 3.7 m radio antenna, designed to communicate back to Earth, up to and beyond the limits of the Solar System.
The RTG and most of the scientific instruments aboard Voyager are placed on two separate arms, on opposite sides of the spacecraft. The decision to place the arms on opposite sides stems from concerns that RTG radiation would interfere with the scientific instruments. Additional arms that hold the magnetometer and antennas are also attached.

Diagram showing the location of each Voyager’s instruments. (Credit: NASA/JPL-Caltech)
Attached to the side of each probe sits the Golden Record. The Golden Record is an approximately 30-cm-wide copper phonograph record plated in gold. Contained within the record are greetings in 55 different languages, sounds and music of Earth, and images of Earth. The record itself sits within a cover featuring a pulsar map showing Earth’s location relative to 14 rotating neutron stars, called “pulsars.”
The Voyager probes have 10 scientific instruments that were used during their primary missions; only a few still operate now as power has dwindled over the years. Voyager’s instrument package includes the Imagery Science System (ISS), Radio Science System (RSS), Infrared Interferometer Spectrometer and Radiometer (IRIS), Ultraviolet Spectrometer (UVS), Triaxial Fluxgate Magnetometer (MAG), Plasma Spectrometer (PLS), Low Energy Charged Particle Instrument (LECP), Cosmic Ray System (CRS), Planetary Radio Astronomy Investigation (PRA), Photopolarimeter System (PPS), and the Plasma Wave Subsystem (PWS).
All but the MAG and PWS have since been turned off or have failed on Voyager 1; Voyager 2’s MAG, PWS, and CRS are all currently active.
Voyager 1’s primary mission
Voyager 1’s mission began on Sept. 5, 1977, aboard a Titan IIIE rocket from Launch Complex 41 (LC-41) at Cape Canaveral Air Force Station. Voyager 1 would launch 16 days after Voyager 2 but would pass its twin on Dec. 19, 1977, as it took a shorter, more optimized trajectory. Voyager 1 would pass through the asteroid belt between December 1977 and September 1978 on its outbound voyage.

Voyager 1’s launch on Sept. 15, 1977 (Credit: NASA/KSC)
Voyager 1 would begin observing its first target, Jupiter, in January 1979, ahead of its closest approach on March 5. The spacecraft would come within roughly 280,000 km of the planet’s cloud tops on its flyby. While at Jupiter, Voyager 1 made several discoveries about the planet, its moons, radiation belts, and rings, some of which were first observed during the flyby. During its flyby, Voyager 1 also discovered two new moons of Jupiter, Metis and Thebe.
Following its flyby of Jupiter, Voyager 1 began observations of its second and final target, Saturn, on Aug. 22, 1980; its closest approach would occur on Nov. 12. At its closest approach, Voyager 1 came within 170,000 km of the cloud tops. During its observation of Saturn, Voyager 1 discovered five new moons, studied the ring structure, which revealed a new ring, the G-ring, shepherd moons that help shape the rings, and other ring features. Additionally, Voyager 1 observed auroral activity in Saturn’s polar regions.
Observations of its final target, Titan, would reveal that the moon’s surface was shrouded by a thick, mostly nitrogen atmosphere. Prevalence of nitrogen, methane, and other hydrocarbons in and on the surface of Titan additionally revealed the potential for prebiotic reactions, or reactions predating life, to be possible. Following its flyby, and due to the requirements for the flyby to be possible, Voyager 1 would be flung out of the ecliptic plane, the flat disc shape where the planets largely orbit, bound for interstellar space.

Image of Saturn from Voyager 1 on approach in Nov. 1980 (Credit: NASA/JPL-Caltech)
Extension
Following the primary mission of exploring Jupiter, Saturn, and Saturn’s moon, Titan, Voyager 1 would begin its next mission, the Voyager Interstellar Mission (VIM), on Jan. 1, 1990. The primary purpose of this mission would be to collect a wide range of measurements of interstellar space. This feat would be accomplished by measuring magnetic fields, particles, and plasma waves in interstellar space.
VIM’s journey into interstellar space would span three primary phases: the termination shock, heliosheath, and interstellar space. At the termination shock, the force of the solar wind weakens dramatically, characterized by a slowdown as particles interact with the interstellar medium and a change in the direction of the Sun’s magnetic field. The heliosheath marks the outer boundary of the heliosphere, where the Sun is still dominant in its magnetic field and solar wind particles. The final phase, interstellar space, is marked by the end of the Sun’s influence on particles in the vacuum of space, after which the interstellar medium becomes the dominant force.
The VIM extended mission also marked the beginning of instrument and system shutdowns aboard Voyager 1 as power continued to decline. Its last images, the “Family Portrait” and the famed “Pale Blue Dot” images, would be completed in February 1990 before its cameras shut off for good. Voyager 1’s latest instrument shutdown was the LECP instrument in April 2026, but NASA has stated that it could be turned back on if needed.

Pale Blue Dot image of Earth from Voyager 1. (Credit: NASA/JPL-Caltech)
While on its outbound voyage to interstellar space, Voyager 1 set numerous distance records and firsts. On Feb. 17, 1998, Voyager 1 passed Pioneer 10, launched in 1972, to become humanity’s furthest-launched spacecraft. Voyager 1 would be the first spacecraft to pass the termination shock, at approximately 94 astronomical units (1 AU, roughly 150 million km, is the distance between the Sun and Earth) on Dec. 17, 2004. Its latest milestone, reaching interstellar space, was accomplished on Aug. 25, 2012, at a distance of roughly 121 AU.
Recent spacecraft troubles
As Voyager 1 approaches 50 years in space in 2027, the spacecraft is continuing to show its age. Over the course of its mission, the RTG’s power generation has degraded substantially. In addition, the thrusters intended to point the spacecraft back toward Earth have clogged. Most recently, a portion of the spacecraft’s data was corrupted, rendering communications unreadable in late 2023 and early 2024.
Voyager 1’s power degradation has been the most troubling aspect of its aging mission. RTGs can provide continuous power for years, but because they generate power through the radioactive decay of Plutonium-238, their output decreases over time due to the finite amount of Plutonium-238 placed in the RTG at the beginning of the mission. At launch, Voyager 1’s RTG produced 470 W of power. Currently, the probe generates only 270 W.

One of three RTGs which power Voyager (Credit: NASA/JPL-Caltech)
NASA’s estimates suggest that the probe’s RTGs will be unable to produce enough power for the spacecraft sometime in the 2030s. Scientific instruments have gradually been turned off to conserve as much power as possible. NASA has switched some instruments to lower-power modes to keep the remaining instruments active.
In September 2026, NASA performed what it calls the “Big Bang” procedure on Voyager 1, following its first use on Voyager 2. This procedure involved Voyager teams simultaneously switching off three powered devices and immediately replacing their power systems with low-power alternatives, allowing the devices to remain powered for about a year longer. If the procedure had not been performed, another Voyager 1 instrument would likely have been permanently shut off as early as summer 2027. The Big Bang procedure will also likely allow the LECP instrument to be turned back on.
Over repeated firings of Voyager 1’s thrusters, propellant residue has gradually accumulated in fuel lines. These thrusters are needed to point the spacecraft back at Earth. To manage the risk, teams have swapped between thrusters over the course of the mission. However, with the probe nearing 50 years in space, all the thrusters are experiencing clogging.
Teams switched to backup roll thrusters in 2004 after the primary thrusters failed. Those primary thrusters were revived in 2025 as teams continue to work on every possible fix and reexamine old decisions. Additionally, teams have allowed Voyager 1 to roll further each time before firing, which reduces use.

DSS-43 receiving upgrades in 2020 (Credit: NASA/JPL-Caltech)
In November 2023, Voyager 1 experienced a significant problem as the probe began sending unreadable data back to its controllers on Earth. Communications were restored over a 45-hour period in April 2024 as teams worked to fix one of the flight data subsystem (FDS) computers, which had become partially corrupted. In October 2026, there would be another communication pause from the spacecraft, but it would be restored within 48 hours.
On Earth, the Deep Space Network’s (DSN) Deep Space Station 43 (DSS-43) site recently underwent upgrades to support the Voyager missions. DSS-43 is located in Canberra, Australia, and is the only station with enough power to communicate with the two Voyagers. Between May 2025 and February 2026, the station was offline for upgrades. With the station the only site capable of communicating with Voyager 1, the period of inactivity could have led to problems developing on either Voyager before teams could have addressed them. Fortunately, the upgrades were completed, and communications with the Voyagers were restored shortly after.
Voyager 1’s plans past one light-day
Although Voyager 1 has reached the milestone of one light-day, roughly 173 AU, its mission is not yet over. The spacecraft will continue to study interstellar space in detail until its last instrument is shut off due to power decline. Once that occurs, Voyager 1 will go dark and float silently through the vastness of space.

Diagram showing the trajectories of Voyager 1 and 2 through the solar system. (Credit: NASA)
Voyager 1’s end of mission (EOM) is expected sometime in the mid-2030s, as power falls to a level insufficient to power the spacecraft. A definitive EOM will occur around 2036, as Voyager 1 exits the DSN’s communications range.
Following EOM, Voyager 1 is set to encounter the Oort Cloud, a theorized cloud of rock and ice, in about 300 years. Voyager 1 will pass through the cloud, roughly 198,000 AU thick, in around 30,000 years. Voyager 1 is on course to reach the constellation Ophiuchus and will pass by Gliese 445, a star in Ursa Minor (the Little Dipper), at a distance of 1.6 light-years in about 40,000 years. Beyond its visit to Gliese 445, Voyager 1 is destined to continue exploring the Milky Way galaxy silently and alone, with its golden record serving as evidence of our existence on the tiny Earth.
(Lead Image: Illustration of a Voyager spacecraft. Credit: NASA/JPL-Caltech)
The post Voyager 1 reaches one light-day nearly 50 years after launch appeared first on NASASpaceFlight.com.
